- High temperature products album
- HT-1000 Product Specification
- MT-800 product brochures
- MT-800C product brochures
- Package style
- K-300
- K-200
- K-150
- TS OCI samples
- JG-20
- Tenano 2020
- Toxicity
- Incombustibility
- Third party inspection report
- MSDS_ JG-20
- Tenano2020 MSDS
- Microporous insulation board MSDS MT-800C
- Thermal insulation board
Tenano 2020
Water - based coatings with nano - silica dispersion
product description
Tenano 2020 is a water-borne dispersion of nano-silica produced using advanced technology for the production of waterborne coatings. The product is milky white appearance, can be directly used for the production of water-based paint, without special equipment dispersion, easy to use.
The product is used in water-based coatings, can effectively improve and balance the performance of a number of coating, while further reducing the volatile organic compounds (VOC).
Product Features
■ reduce the tendency of film cracking, reducing the minimum film-forming temperature (MFFT)
■ Reduce VOC emissions, partially or completely replace organic film-forming auxiliaries
■ increase the hardness of the film, good scratch resistance, improve the film sticky phenomenon, improve the dirt resistance
■ to promote the dispersion of pigment stability, anti-settlement
■ Anti-sagging
■ Main physical and chemical data
The data are non-production parameters, for reference onlynature
unit
Typical values
SiO2
wt.％
20.0±1.0
pH
10.0±0.5
Viscosity
mPa.s
≤100
The average particle size
μm
≤0.1
density（20 ℃）
g/ml
1.12±0.05
Exterior
Milky white liquid
Product safety maintenance
We will provide a copy of the Material Safety Data Sheet (MSDS) upon delivery of the sample or the first shipment. You can also request a Material Safety Data Sheet (MSDS) or any other information about product safety at any time Product packaging and storage
Products are generally available in 60 kg plastic drums.
Tenano 2020 must be stored in a suitable environment, high temperature (> 50oC) or too low (<4oC) temperature will cause product quality damage. The product is valid for 6 months, preferably in the production from the date of use within 6 months. The product in the storage process will be a small amount of settlement, is a normal situation, does not affect the normal use of the product
The information in this article is based on our best knowledge of the product. We make no warranty as to the accuracy and completeness of such information and shall not be liable for any potential loss of property rights. We reserve the right to make technical changes to our products at any time without notice. Users of any of our products are responsible for all of their property, health and other risks in use