MT-800C nano porous insulation board instructions

Product Description:

MT-800C is a nano-porous principle developed based on the new high-performance insulation materials. The material consists of 7 to 12 nanometer silicon dioxide, the formation of innumerable nano-level micropores, and contains high-efficiency infrared reflection components, to maximize the inhibition of heat conduction, convection and radiation, with still lower than the static air thermal conductivity. The thermal insulation properties of the material is three to six times that of traditional materials, and it is one of the high-temperature insulation materials with the highest heat preservation efficiency so far.

product appearance:

Appearance: gray plate material
Ingredients: SiO2 (60% -80%), SiC (10% -30%), others (5% -10%)
Standard size: 1200 * 1000mm, 1200 * 500mm, 600 * 500mm, 1000 * 600mm,
The other in the 1200 * 1000 mm range can be customized
Thickness: 5-35mm
Shape tolerance: length and width direction: ± 3mm: thickness direction: ± 1mm
Surface treatment: can provide bare board, plastic film coating, aluminum foil coating, high temperature glass fiber cloth packaging and other products
Special shape: according to customer requirements in advance for cutting, drilling, special-shaped cutting and other processing

Performance parameters:

main feature:

→ low thermal conductivity
Insulation performance is 3-4 times that of traditional materials, can reduce the energy consumption of equipment, reduce the thickness of the insulation layer / weight, or provide greater equipment effective capacity.

→ thermal characteristics
The heat is small, heat shock, in the case of external damage can not be permanent use.

→ green environmental protection
Does not contain harmful human fiber composition, in line with relevant environmental standards.

→ Easy to install
Can be used woodworking tools for cutting, drilling and other processing. (Note: the product in the installation and use of the process can not touch the liquid)

→ Non-flammability
This product is non-combustible materials, can be used as a fire insulation layer.

Applications:
(Melting furnace, holding furnace, ladle, runner); ceramics (rail kiln, tunnel kiln); glass (melting furnace, runner, bend); (Fuel cell, the kiln, etc.) thermal equipment (temperature recorder, thermal batteries); special equipment (elevators); home appliances (regenerative electric heaters, electric ceramic heaters); aviation navigation (black box, cabin).

The information in this article is based on our best knowledge of the product. We make no warranty as to the accuracy and completeness of such information and shall not be liable for any potential loss of property rights. We reserve the right to make technical changes to our products at any time without notice.

Users of any of our products are responsible for all of their property, health and other risks in use.